Live Display
Real-time stats on ESP32 TFT screen with beautiful gradients
Telegram Alerts
Instant notifications on your phone for every event
Sound Alerts
Optional buzzer for audio notifications
Track Everything
Downloads, prints, boosts, and points with decimals
⚠️ Requirements
- Hardware: ESP32-2432S028R (CYD) or compatible ESP32 with TFT display
- Browser: Chrome, Edge, or Opera (with Web Serial API support)
- Cable: USB-C data cable (not charge-only)
- Driver: CH340/CP2102 USB driver (usually auto-installed)
🔥 Flash Firmware
Connect ESP32
Connect your ESP32 device via USB-C cable to your computer
Click Install
Click the button below and select your ESP32 port from the list
Wait
The flashing process takes about 2 minutes. Don't disconnect!
Setup WiFi
Connect to "MakerWorld-Setup" WiFi network and configure
🎨 Color Inversion Fix
Some CYD displays show inverted colors - if this happens to you, use this fix!
Do you see this?
- ❌ Text appears BLACK on WHITE background
- ❌ Colors look inverted/wrong
- ❌ Display is hard to read
- ❌ Interface doesn't look right
Instructions: Try the normal firmware first. If colors are inverted, come back and install this fix.
✅ After fix: Text should be WHITE on BLACK background with correct colors
💡 What Happens Next?
After flashing, your ESP32 will restart and create a WiFi network called "MakerWorld-Setup". Connect to it with your phone or computer, and a configuration page will open automatically. Select your home WiFi network, enter the password, and you're done! The device will show its IP address on screen.
🔧 Next Steps
1. Install the browser extension
2. Configure ESP32 IP or Telegram in extension settings
3. Visit your MakerWorld profile and enjoy live monitoring!
✨ Optional: Buzzer Setup
- Connect passive buzzer positive (+) to GPIO 22
- Connect buzzer negative (-) to GND
- Enjoy sound notifications for every event!
- No buzzer? No problem - everything works without it